Cut Boss OC-2 (single octave down version)

[Neur0]

Shoot, you're right. Guess I'll have to troubleshoot the thing. Thanks for the quick reply though, appreciate it.

Op 26 jul. 2014 01:00 schreef "johnk [via Guitar FX Layouts]" <[hidden email]>:

I doesn't matter if it's one column to the right since both the positive and negative connections are on the same rows.

---

If you reply to this email, your message will be added to the discussion below:

http://guitar-fx-layouts.42897.x6.nabble.com/Cut-Boss-OC-2-single-octave-down-version-tp4960p11805.html

To unsubscribe from Cut Boss OC-2 (single octave down version), click here.
NAML

[Neur0]

Hello all,
I'm afraid I need some help on this one.
I went through the whole fault finding process, including reflowing all the solder joints, but no luck.
Here are my voltages, hopefully somebody can point me in the right direction.

4013:                           324:

0         9.06                  1.15    0
9.06     0                      4.34    3.28
0         9.06                  3.49    1.45
0         0                      9.06    0
9.06    2.08                  2.08    2.08
0         0                      2.07    2.08
0         0                      1.87    1.67


074:                         5088:

4.91    4.92               C: 9.06
4.92    4.91               B: 4.85
4.47    4.59               E: 4.29
9.06    0
4.87    4.60               J201:
4.92    4.93
4.93    4.92              G: 4.31
                               S: 4.92
                               D: 4.92

Hopefully this will make sense to somebody. My DIY knowledge is still like a guitarist using his right hand to contort the left fingers in to grabbing a G chord. Unless you're left handed of course :)

Kind regards

[Neur0]

Hello again, After a few smaller, successful builds I am back on this one. I got it working but the octave down gets distorted quite fast when turn up the dial, which is a secondary problem to the fact that it doesn't seem to be tracking well (as you guys call it, I believe).

I recorded a soundclip with three different instruments so you can hear what the problem is. Any ideas as to the cause of this to happen with this effect would be greatly appreciated since I was really looking forward to using this build with my rc-50 loopstation.

OC-2 Cut Version Audio Sample

Regards,

Remy