Digitech Hothead: VERIFIED 03/03/2018

[chance]

Digitech Hothead true bypass with the buffers and switching removed. UPDATE 03/03/2018: VERIFIED - New layout posted, please delete the previous due to errors. I have just completed this layout and it works brilliantly, very low noise. I have JRC4558 op-amps in mine at the moment, test and adjust as usual.
29/07/2018 UPDATE: Updated layout with today's date. As per the comment below, I had D3 and D4 labelled incorrectly.

[Sphere80]

Thanks!  Looking at the schematic reminds me a little of an HM-2 into a muff type tone control with bass gyrator.  It's not a clone, of course, there are many vital differences.  

The schem.  has the cab sim portion, if anyone wants to give it a try. It should be simple enough. A band mate used to play shows with this direct into the board and remembers it being fine for the job.

[Hozy31]

Built this, sounds really good. By the way D3 and D4 are labelled the wrong way round on the layout compared to your description underneath.

[chance]

Great spotting mate, I have updated the layout above with correct diode references.