Hello, glad to be a part of the forum, as DIY'ing seems much more fun than drinking your ass off.
Anyways, I would like to ask if any of you could please do a vero layout of the Jackson JE-1200 preamp.
I have breadboarded it and it seemed to work, although, when I attempted to make my own vero layout (with DIYLC) it took me two wasted attempts and I still couldn't get it to work. funnily enough, I can't even get it to work on a breadboard anymore lol. well, I guess I might just be retarded.
Below is a link to the schematic I used back when I breadboarded it from FSB.
Hope this ain't too much of a hassle yall.
I wanted to check it with a different IC and the signal was still going thru even after taking it out (I was able to play and hear it) and then noticed I missed a ground wire from the 9v. Connected that one and now I just get noise and a weakish signal.
uum, perhaps the adjustments (fixing corrections made later on) I made screwed something up.
Regardless, I shall give this a try tomorrow as it's pretty late at the moment.