Klon Centaur buffered and using a 3PDT and bypass daughterboard

[james03]

Hi - I have just built the board for a Klon Centaur (not the second revision) from a kit from bitsbox, http://tagboardeffects.blogspot.co.uk/2012/02/klon-centaur.html

I've also got 3pdt switches and these daughterboards with true bypass and LED on from Fuzzdog - http://shop.pedalparts.co.uk/3PDT_Daughterboard_-_Direct_Connect/p847124_12774515.aspx 

I'd like to use them, as they are the same as my other pedals, and my 'test boxes' are all wired up the same way.

Now, looking at the schematic, I can't work out if I'm going to have an issue trying to true bypass the buffered klon - can anyone advise?

I've got a Ground, V, circuit in and circuit out from the daughterboard, can I connect those to the relevant places on the Buffered version that I've made (didn't see the 'true bypass' until I'd built the thing).

Thanks - appreciate the help.

[james03]

Or...  if anyone is clued up on the buffer stage of that circuit, can I make the buffer switchable somehow? Presumably that won't play well with that daughterboard, as it's hard-wired to be true bypass?

thanks - just getting my head around this!