MXR Envelope Filter

[JaviCAP]

Hello,

It seems not so complicated, isn't it?

[alltrax74]

I just finished this one with the pcb
Made both emphasis and reverse switch mods
Very nice envelope

[JaviCAP]

Great! Let's see if mark or Miro tell us anything (I bet that in about an hour ot two Mark can be very happy ot just mad) :P

If not vero doable, I'll get a pcb too, want to try this envelope, as for reviews the Mxr and the Mu-tron III are the best ones you can try.

BR

[alltrax74]

Here's a pic of mine

[JaviCAP]

Nice one, but I'm afraid that Mark's not in the best mood right now. Where did you get the pcb by the way?

[alltrax74]

On this french site : http://techniguitare.com/forum/galerie-marchande/fabrication-circuits-imprimes-demande-t8209.html
But Francisco at tonepad also makes great boards

[JaviCAP]

Hey dudes, any new?

Let us know if you plan to do it :P If so, I'll wait  no matter how long it takes, but if you don't intend  to do it, I'll ask for a pcb etching on next week.

BR!

[IvIark]

I don't know how, but I totally missed this thread.   Normally with 3 larger ICs I would say PCB, but there isn't actually too much else going on in it.  Let me see if I can estimate how small I can get it and I'll let you know.

[JaviCAP]

Thanks, Mark!

[Emil]

Hi!

I found this thread when looking at the most recent request for the Emma Discombobulator. As it happens, version 1 of the Emma Discomboblator looks like it's pretty much the MXR Envelope filter with all of the mods in this schematic. But since the schematic that's floating around for that one is missing a lot of information I figured I'd try a vero layout for the MXR Envelope.

I've tried doing a layout for both the stock and modded version. But my layout for the modded version looks way too awkward right now. But here's the stock one anyway! It could probably use a second pair of eyes though .