Need help with wiring

[syamilaliff]

CONTENTS DELETED

The author has deleted this message.

[Zanius]

You only need a Dpdt switch to do what you want, but a 3pdt will work as well.
according to the standard numbering

1 4 7
2 5 8
3 6 9

2-to boost 1
3-to sw3
5-to ground
6-to led's - side ( here is a good point to also add the led's resistor if you don't already have it on the + side)

That's all :)

[syamilaliff]

Zanius wrote

You only need a Dpdt switch to do what you want, but a 3pdt will work as well.
according to the standard numbering

1 4 7
2 5 8
3 6 9

2-to boost 1
3-to sw3
5-to ground
6-to led's - side ( here is a good point to also add the led's resistor if you don't already have it on the + side)

That's all :)

Hi Zanius,

So the input from the board should go to pin 1 on the switch and output to pin 4? I'm sorry for asking this. This is my first time building a pedal.

[Travis]

Since you are not doing true bypass, input goes to the input jack tip and output goes to output jack tip

[syamilaliff]

Travis wrote

Since you are not doing true bypass, input goes to the input jack tip and output goes to output jack tip

Hi Travis,

Thanks a lot mate. You guys are the best!

[katoptrizo]

This is literally the best way a forum post could go.  No passive-aggressive "look it up" etc.  This is why this forum is one of the few I still frequent.

Nothing more to add from me, but just wanted to give kudos to the participants here.