SHO Help

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

SHO Help

53 Shades of Fuzz
I wired this up yesterday and signal passes but there is only unity gain. The pot works because I can turn it and it crackles but the volume doesn't change. I socketed the transistor and flipped it but no change. I put in a linear pot instead of the rev log would that cause it? Or is it a faulty transistor? Any ideas?
Reply | Threaded
Open this post in threaded view
|

Re: SHO Help

tyler9durden
Not sure how experienced you are - maybe more than me - but I did SHO for my first build and think I had every newbie fault during the build - but got it working eventually and is a great pedal. built 7 since and almost all build faults have been wrong orientation of diodes, transistors or solder in the tracks.

I started running a junior hacksaw in the tracks and this cleans them nicely.

Worth getting a magnifying glass in close and checking everything as component fault is least likely IMHO

Also worth looking at earlier topic on using test rig this has really makes things easier and less frustrating.

Hope that helps. Good Luck