Re: Top Gear Fuzz Sustain
Posted by Ciaran Haslett on Jul 03, 2016; 6:40pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/Top-Gear-Fuzz-Sustain-tp31845p31850.html
Modified Dist+? You could try following this schematic with your multimeter and see if they match (or close).
As for removing..undo all nuts on the pots and try heating the board/enclosure with a hair dryer or heat gun. Hold the board at the sides and slowly turn it CW and CCW. Much less stress on the board than trying to peel it away. If it starts to move then it's working. If not then.......
URL: http://guitar-fx-layouts.238.s1.nabble.com/Top-Gear-Fuzz-Sustain-tp31845p31850.html
Modified Dist+? You could try following this schematic with your multimeter and see if they match (or close).
As for removing..undo all nuts on the pots and try heating the board/enclosure with a hair dryer or heat gun. Hold the board at the sides and slowly turn it CW and CCW. Much less stress on the board than trying to peel it away. If it starts to move then it's working. If not then.......
| Free forum by Nabble | Edit this page |