Re: Mad Bean Modulaterator

Posted by Ubertech_s on
URL: http://guitar-fx-layouts.238.s1.nabble.com/Mad-Bean-Modulaterator-tp32614p32671.html

the 2 pots and the resistor work depth, rate and pitch modulation, but that is as a ratio to the delay time.

I modded my deep blue to have double delay (simple, effective but dirty mod - just extra switched resistor in series with the delay pot doubling its resistance range) SO the delays go from slap back to about 700ms.

the suggested resistors for the pitch mod switch didnt work for me over these ranges as the pitch mod produced was too extreme.

Pitch result:
47k - extreme modulation with areas of oscillation, very creative but not for me this time
200k - less extreme but still quite radical
360k - about the most pitch mod I wanted for this particular flavour; I chose this as my 'radical value'
1M - softer drifting towards tape, was my favourite generally, but I wanted more of a difference from 360
1M8 - very tape like drift available (depending on depth set) useful for the longer delay settings
2M2 - at its least depth and rate almost too subtle for a delay, but at higher mix levels was very nice

In the end for my needs I chose 360k and 1M8, and they come highly recommended :)

if I get a chance I will build the LDR modulation daughter board and compare the two, but as a cheap daughter board to mod an analogue delay this is great.

thanks again

Shaun