Re: First layout attempt
Posted by Ciaran Haslett on Jun 25, 2017; 12:50pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/First-layout-attempt-tp38811p38817.html
Nice one Tim.
The only real advice I can offer (and I'm certainly no expert at layouts) is to start with a specific footprint in mind. So you've 4 pots and a switch...I'm thinking 1590B or 125 box. I'd be looking for 21 wide and maybe 12 deep max! So I'd load in that size of vero on DIYLC to start with and try to squeeze the circuit into that.
Just how I would try it. You could remove 1 cut and 1 link from V+ to the trimmers too and save a bit of build time.
Welcome
URL: http://guitar-fx-layouts.238.s1.nabble.com/First-layout-attempt-tp38811p38817.html
Nice one Tim.
The only real advice I can offer (and I'm certainly no expert at layouts) is to start with a specific footprint in mind. So you've 4 pots and a switch...I'm thinking 1590B or 125 box. I'd be looking for 21 wide and maybe 12 deep max! So I'd load in that size of vero on DIYLC to start with and try to squeeze the circuit into that.
Just how I would try it. You could remove 1 cut and 1 link from V+ to the trimmers too and save a bit of build time.
Welcome
| Free forum by Nabble | Edit this page |