Re: Headphone amp / mixer

Posted by MAO on
URL: http://guitar-fx-layouts.238.s1.nabble.com/Headphone-amp-mixer-tp44796p45011.html

I'm sure there are better ones, but originally I used these 3.5mm jacks from Tayda.

Not fun to work with but did the trick. If you download the datasheet, you connect B and E to the headphones out, A, C and D to ground.

I used a meter to figure out which pin was which.

If I were to do it again for myself, I'd probably go with stereo 1/4 inch jacks and use an adapter for the 3.5 mm audio in cable and headphone out. Already had the adapter for my headphones so I'm now using a 1/4 inch there.