Re: Spaceman Effects Nebula

Posted by brazdj on
URL: http://guitar-fx-layouts.238.s1.nabble.com/Spaceman-Effects-Nebula-tp45152p48749.html

My density issue was due was a tiny solder bridge. Doh!

As I was tracing the issue, however, I noted two tiny errors in the layout.

1. The 10K resistor closest to pin4 of IC5 should be moved two rows up to connect to pin6 of IC5. Both pin 4 and 6 of IC5 should have 10k resistors to Vr. Currently pin 4 has two 10 k resistors to Vr, while pink 6 has none.

2. The 1uf capacitor four columns to the left of pin 3 of IC5 should be connected to pin4 of IC5. I did this by connecting at an angle. One leg of the cap goes to where the 10K resistor (that should be moved) connects. The second leg of the 1uf capacitor connects two rows down and two columns to the left (45 degrees) to the left side of the semi-transparent, horizontal 1uf capacitor.