Re: Gravity wave wiring

Posted by stinkypu on Sep 21, 2020; 5:54pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/Gravity-wave-wiring-tp47277p49208.html

Hi Adam thanks for the  reply

Ive built this 3 seperate times lol and never had any luck ive built others and only had the normal nut behind the wheel issues (i was building one for a friend and he needed a 9v battery and only told me this after i built and tested the thing after adding the battery snap i managed to the hold the battery on the wrong contacts and fried the whole thing replaced the caps and the ic still nothing built it from scratch again nothing turned out the second build i misplaced a resisitor in to the wrong row d'oh)

for this build i decicided to buy a pcb and then make sure the ics are working and then for the others i bought a small component tester which is quite handy its able to do transistors capacitors resisitors and diodes and was only about £7 the other thing which i have since added to my bits box is a pair of side cutters you can really get a good low cut with them i was using a pair of snips before that were ok but not the right tool for the job :)

Once i can summon the enthusiasm to get back to this one i'll post back and update where i went wrong :)

Cheers