Re: ZVex Woolly Mammoth foot switch/jack socket/DC power socket wiring?

Posted by berniethebolt on
URL: http://guitar-fx-layouts.238.s1.nabble.com/ZVex-Woolly-Mammoth-foot-switch-jack-socket-DC-power-socket-wiring-tp49444p49454.html

Thank you for the diagrams, spot on. I should have found these myself (sorry, still learning the basics), but I did take your advice & test the mammoth. It works really well, with a great range of sounds. Now I feel confident to wrestle it into the box!

On 23/11/2020 00:47, Bolsyo [via Guitar FX Layouts] wrote:

Offboard in the top menu:
https://tagboardeffects.blogspot.com/2012/02/offboard-wiring.html



Personally I always test the circuit before wiring the switch. I use alligator clip test leads to connect input/output wires straight to the jacks, chain the grounds together. If the circuit has few pots/toggleswitches I use test leads to connect those and the power jack too for testing.

---

If you reply to this email, your message will be added to the discussion below:

http://guitar-fx-layouts.42897.x6.nabble.com/ZVex-Woolly-Mammoth-foot-switch-jack-socket-DC-power-socket-wiring-tp49444p49445.html

To unsubscribe from ZVex Woolly Mammoth foot switch/jack socket/DC power socket wiring?, click here.
NAML