Re: DIY custom sized stripboards

Posted by MAO on Oct 13, 2022; 3:51pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/DIY-custom-sized-stripboards-tp50556p50603.html

Appreciate it Lumpy,

FYI, I've done this process 1/2 dozen or more times without fail, making both large and small boards, but did have one 23x26 snap at the seem when I carelessly pressed it down too hard on a ball of blu tack for soldering.

I had the blu tack balled up and directly under the seam, carelessly pressed the board down to flatten the blu tack a bit and the board snapped.

The board was 80% populated so I just added another bead of the glue across the seam, let it set overnight and all was good. Finished it up without issue.

If you try this, just be careful not to add too much pressure accross the seam.