Re: How to do a vero cut on a breadboard

Posted by Bodge on Feb 17, 2023; 6:40pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/How-to-do-a-vero-cut-on-a-breadboard-tp50731p50732.html

You are probably better off breadboarding from the schematic rather than the layout. If you want to go from the layout every cut means start a new row. Is this so you can tweak values before putting the Vero together or see if you like the effect before boxing it? You can always put some sockets on the Vero for some components you want to experiment with. Good luck