Re: FoxRox Octron 3 (Octave)
Posted by Lost_Soul on Mar 10, 2025; 1:04am
URL: http://guitar-fx-layouts.238.s1.nabble.com/FoxRox-Octron-3-Octave-tp51132p51193.html
From the first look at the board it looks fine, however i don't see the link here:
But that should only affect the octave up only and not make it have no sound at all.
Also, you can try to reverse the source and drain pins for Q1 And Q2 as i placed them like that because i thought they are interchangable (they are but idk if they are in this exact situation). You can just do this and put a piece of wire insulation on 1 pin just to make sure they don't touch and see what happens
And tomorrow i will check the layout compared to the schematic again to see if there is a problem.
I have the circuit on a breadboard that i used just to test if the schematic works, and it did work.
This is the schematic i used.
https://docs.pedalpcb.com/project/Schematic-Octarock.png
URL: http://guitar-fx-layouts.238.s1.nabble.com/FoxRox-Octron-3-Octave-tp51132p51193.html
From the first look at the board it looks fine, however i don't see the link here:
But that should only affect the octave up only and not make it have no sound at all.
Also, you can try to reverse the source and drain pins for Q1 And Q2 as i placed them like that because i thought they are interchangable (they are but idk if they are in this exact situation). You can just do this and put a piece of wire insulation on 1 pin just to make sure they don't touch and see what happens
And tomorrow i will check the layout compared to the schematic again to see if there is a problem.
I have the circuit on a breadboard that i used just to test if the schematic works, and it did work.
This is the schematic i used.
https://docs.pedalpcb.com/project/Schematic-Octarock.png
| Free forum by Nabble | Edit this page |