Re: Braxonall (James) Tonestack with LPB1

Posted by mojo321 on Nov 14, 2013; 6:01pm
URL: http://guitar-fx-layouts.238.s1.nabble.com/Baxandall-James-Tonestack-with-LPB1-tp6752p6782.html

No idea.  I know that if you use regular log pots you will still have the same ranges available, because the limits are set by the value, not the taper.  So it isn't a huge loss to have to use regular log pots.  They just have a lot of the action bunched up on one very sensitive end.

HOWEVER, it would be really cool if someone could go into the pot custom taper calculator and mess with some resistors on larger valued log pots to "turn them into" these value and tapers that the Baxandall really craves!  

As far as line level goes, I don't know.  I'm sure it works, but I do know that the LPB1 was very much needed, as the tone circuit really pulls the level down. (which is probably why your guitar only has 1 cap soldered to the tone knob instead of a BMP circuit.  More stuff in the circuit=lower level output signal)