2 channel mic pre-amp

[Lbird427]

Hi,
So I ordered the 2 channel kit from Tayda and didn't realize it only provided the schematic.  I have never transferred something from schematic to vero.  I've made a few attempts at this and just can't do it.  Anyone feel like helping me out?  Will provide schematic to whoever is interested.

[Jopn]

I can try.  [e-mail]

[Lbird427]

Thanks, just emailed it over.

[Geiri]

To me, a kit is only a kit when it includes everything needed to build the thing.

[Lbird427]

Well in all fairness to Tayda,
1. It was only 8 bucks,
2. Other than the enclosure it pretty much came with all the components, and
3.  If I wasn't a dummy the schematic would've been enough.

[Jopn]

Hoping to get this done tonight or tomorrow.  It has a suggested mod for adding a switch to adjust between condenser and non-condenser mics, so I'll include that but will keep the points close enough together so that you can easily hardwire a resistor or a link if you don't want the switch.

I'm a little disappointed that the lines are unbalanced, but c'est la vie.

[Lbird427]

How is it looking?