BBE Sonic Stomp Clone Lumin

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

BBE Sonic Stomp Clone Lumin

semajmiyta
built a BBE Sonic Stomp .I housed it in my temp box. I loved the pedal and decided to permabox it. After that it only worked in by pas mode . I checked voltages on all the ic's all 3 have 4.60 volts on all pins except 4 & 8. Pin 4 has 0 volts on all Ic's and pin 8 9.21 volts using a power supply reading 9.22 volts. Any Ideas?

Or possibly correct voltage readings for the IC's?
Reply | Threaded
Open this post in threaded view
|

Re: BBE Sonic Stomp Clone Lumin

PMowdes

Some photo's would help

IC voltages look correct, it's probably an issue with grounding or off-board wiring.
Reply | Threaded
Open this post in threaded view
|

Re: BBE Sonic Stomp Clone Lumin

Emil
In reply to this post by semajmiyta
Make sure that nothing is shorting against the enclosure. I recently had a problem with a build that only worked lid off for example.
Reply | Threaded
Open this post in threaded view
|

Re: BBE Sonic Stomp Clone Lumin

semajmiyta
In reply to this post by PMowdes
The offboard wiring (because I did remove 3-4 solid wires replacing them with stranded on a double sided board.) was my 1st thought and though Ive reflowed all the solder 3-4 times checked continuity I believe the fact it worked perfectly before i rehoused it can only be something i screwed up rehousing it. Its just the voltage readings seemed off to me. So 'I'll keep after the wiring EXCEPT there is one more thing. I did remove switch to eliminate bad wiring there and still no sound with the effect on.  ........so..............theres that.
 thank you for your time and info.

oh and here is the schematicBBE Sonic Stomp  (Lumin)