Dual Effects - One enclosure with order switching?

[Snare227]

Mark has a great diagram up for doing the offboard wiring for two pedals in one box that I'm thinking about tackling after I finish up a few projects.  I was wondering if anyone had an altered diagram of the wiring that includes an order switching option (ie. Pedal A into Pedal B, flip switch, B into A), I would love to see it.  I'm thinking I'll need a 3PDT toggle to get this accomplished.  It will probably be a little while before I get around to trying it out, but you never know when it's going to rain and give you a day inside to tackle a project.  Thanks!

[Pipes]

Here's a Beavis diagram for it, I've not tried it, but I trust him

http://www.beavisaudio.com/projects/Looper-Switcher/Effect-Order-Switcher-Wiring-Diagram.png

[GoranP]

I've tried it and it works as advertised. I just dispensed with the led because I used a regular Tayda 3pdt flip switch instead of a footswitch so it's easy to tell which position (effects order) it is in.

There are other schematics out there for this but this one works just fine.

[Snare227]

I'll probably also opt for the toggle and do away with the LEDs.  Thanks guys... I will be sure to save this and give it a go.  

[GoranP]

Like so... it's an Xotic RC Booster and a Sweet Honey OD in a 1790ns with the order switcher (only one input and output)

[JaviCAP]

Goran, after several hours dealing with the Animal, my brain's not very fresh :P

Could you please show how you wired this double effect sinlge input / output  with just a 3PDT doing the route?

BR!

[Geiri]

I built an EP booster + Timmy with the effects order switcher from the layout above.

Here's what it looks like:


I used a 4PDT to switch between and the LED shows the side that's first in the chain.

JaviCAP, it's easy to wire it.

Send A is the input from the jack to the first circuit. That's lug 8 on the 3PDT
Return A is the output to the jack from the first circuit. That's lugs 4 and 9 on the 3PDT

Send B is the same but second circuit
Return B is the same but second circuit.

[JaviCAP]

Thanks Geiri, I get it!

BR

[Vince]

This may help for those, like me, who like to see it in black and white.

[colonyhc]

Just curious, what would the wiring look like for 3 pedals?

Just saw walrus audio made a 3-in-1 with order switching.