Rocket88's and Alltrax's recent Marshall layouts on the main page gave me the self-confidence boost I needed to attempt my second layout on DIYLC.
So, here it goes, the Marshall 8001 Valvestate preamp.
Needless to say, yet unverified.
You will notice every wire has a 2-row separation, that's because I like to use 5mm spacing terminal clamps to wire.
There's also needless/pointless dead-end wiring. That's one of my little quirks, I don't like pot-to-pot wiring and like to have it all neatly set up on the board.
Here is the link to the diylc file if anyone wants to reduce the size and/or adapt it to conventional wiring.
Schematic
here.
I'm unsure about voltage, as the schematic doesn't specify anything. My guess is it's the same as the 3005 layout.
I'll try to verify it as soon as I get more pots & caps, a little low on stock right now.
Corrections and suggestions are very welcome!
Cheers to y'all
/ZVDW
EDIT 1: "Vol 2 to Output" missing, added now.
EDIT 2: Switch pinout added to avoid confusion with Alltrax74's layout.