Please - JHS, Thorpyfx, Keeley and more!!!!

[Teddeeh]

Hi, i know people have thier stigma over JHS.
But is anyone willing to attempt the angry charlie v3 and charlie brown v4, and possibly a couple of otherd? Schematics are in eqch page. I know there are “versions but i think that stigma and peoples biases aside these would be phenominal additions to the community.  
https://www.pedalpcb.com/product/angrycharles/

Charlie brown v4
https://www.pedalpcb.com/product/vanpelt/

Here we have the thorpyfx muffroomcloud!!!
https://www.pedalpcb.com/product/pyrocumulus/

Fulltone mas malo
https://www.pedalpcb.com/product/speedygonzales/

EQD - dunes
https://www.pedalpcb.com/docs/Oasis.pdf 

Keeey magnetic echo
https://www.pedalpcb.com/product/magnetrondelay/

[PMowdes]

You'll notice there is no schematic for the Thorpy Muffroom cloud.  I'm pretty sure this was at the request of Adrian Thorpe, so no vero.

[Mulekicker]

I'd love to see the Dunes.

[MAO]

I'm laid up again with another surgery, so will probably be knocking out some layouts next few weeks.

These look like a good place to start...I'm on them tomorrow, unless otherwise noted.

Dunes and Charley Brown

Mike

[Addy Bart]

Hey Mike, don’t worry about the Dunes - there’s vero & perf board layouts already.

[MAO]

Thanks for the heads up!
I'll work on the Charlie Brown...

[BetterOffShred]

But feel free to nail that rebote 3.0 ..  just sayin.

[MAO]

Holy cow, looks like I'll need to be off the pain meds for that one!

[BetterOffShred]

Awww sorry to hear you're laid up again man.  I built a couple of your layouts from the leg incident.  

[MAO]

Thanks, hope those worked out well.

Had 2 discs removed from my neck this time, most likely caused from that same accident. After 9 months of pain, finally realised they wouldn't heal on their own, had them taken out.

I'll let you know about the robote 3 in that thread...

[MAO]

Charlie Brown V4

Might want to mount this one rotated CCW as it is 23 rows wide. Plus the offboard wiring will be tidier if rotated CCW.

I put extra grounds for the input and stomp switch on both edges for easy access depending on mounting position.

There is a 100k that spans 3 rows. Use a 1/8 watt if you have one, otherwise you could bend one the legs back underneath or have the 100k stand up a bit.

[velouriafx]

Mao, you're the best. I did maintenance on a Charlie Brown and I really liked the pedal. BTW you even did some layout for Anderton's Phase Shifter without the Envelope? I was intrigued by that pedal. I really liked Phaser, but I had problems with the envelope.

[MAO]

Thanks for the kind words velouriafx, here is the Anderton Phase Shifter without the Envelope Filter.

http://guitar-fx-layouts.42897.x6.nabble.com/Craig-Anderton-Phase-Shifter-tp44100.html

You might want to check out this feature rich phaser too.

http://tagboardeffects.blogspot.com/2018/09/blackout-effectors-whetstone-phaser.html

[GrooveChampion]

Am I tripping balls or is the Charlie Brown V4 has gain stages similar to the Hard On/Box of Rock?

[Mulekicker]

It is JHS we're talkin bout.

[velouriafx]

I built MAO layout and it doesn't have sound. I quickly compared it with the schematic, but i don't find any problem. Anyone verified it?

[HamishR]

Here is my take on the Angry Charlie.  I modded mine a bit so I have just changed a few things back to the stock values - I hope I got all of them.  It definitely works because i have built it. It's a pretty good pedal.

[beavis]

Hi HamishR do you have the buying list of your angry charlie V3? i need to know the voltage of the capacitor and the resistance os the resistors 1/4w 1/8w?

[simon ff]

They've recently added the schematics to all the thorpyfx pedals.

https://www.pedalpcb.com/docs/GuardianOD.pdf

https://www.pedalpcb.com/docs/Pyrocumulus.pdf