Having a few issues.
First, the layout specifies 3 pots in the description, but refers to 4 pots on the vero layout.
Here's what I show in the layout:
100kB Vol
1kB Rate
500kB Wave Form
??? Depth
On the original schematic I see:
100k trim/100kA Vol
100kC Rate
500k trim/500kB Wave Form
1kB Depth
Aside from this, I can only manage to get one of the Vactrol LEDs to light up per the layout.
D4 lights up, passes to D3 which lights up, but it's not continuing to D2. What's really weird is that if I short the legs of D3 while it's plugged in it goes dark, but then D2 lights up and starts working fine.
Similarly if I short D4's legs, both D3 and D2 light up. In any event, D2 is always noticeably dimmer. I have no idea if that is part of the effect or what, but it doesn't look right to me.
Soundwise, I'm getting a very farty sounding tremolo so I can;t tell if it's "Harmonic" or not, heh. Might be due to the J201 biases. Without trimmers it's going to be a pain in the ass to adjust the voltages.
It's 4:30am here and I've been at this thing for 5 hours so I'll check voltages later after I sleep some.